Fortinet NSE7_EFW-7.2높은통과율시험대비공부자료, NSE7_EFW-7.2높은통과율인기시험자료

ExamPassdump의 완벽한 Fortinet인증 NSE7_EFW-7.2덤프는 고객님이Fortinet인증 NSE7_EFW-7.2시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. ExamPassdump의 Fortinet인증 NSE7_EFW-7.2덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.

Fortinet NSE7_EFW-7.2 시험요강:

주제	소개
주제 1	System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
주제 2	VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
주제 3	Central management: The topic of Central management covers implementing central management.
주제 4	Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
주제 5	Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.

>> Fortinet NSE7_EFW-7.2높은 통과율 시험대비 공부자료 <<

Fortinet NSE7_EFW-7.2높은 통과율 인기 시험자료 & NSE7_EFW-7.2최고품질 덤프문제

다른 사이트에서도Fortinet NSE7_EFW-7.2인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ExamPassdump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ExamPassdump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ExamPassdump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.

최신 NSE 7 Network Security Architect NSE7_EFW-7.2 무료샘플문제 (Q45-Q50):

질문 # 45
Which two statements about bfd are true? (Choose two)

A. It works for OSPF and BGP
B. You must configure n globally only
C. It can support neighbor only over the next hop in BGP
D. You can disable it at the protocol level

정답：A,D

설명：
BFD (Bidirectional Forwarding Detection) is a protocol that can quickly detect failures in the forwarding path between two adjacent devices. You can disable BFD at the protocol level by using the "set bfd disable" command under the OSPF or BGP configuration. BFD works for both OSPF and BGP protocols, as well as static routes and SD-WAN rules. Reference := BFD | FortiGate / FortiOS 7.2.0 - Fortinet Document Library, section "BFD".

질문 # 46
Refer to the exhibit, which provides information on BGP neighbors.

What can you conclude from this command output?

A. The routers are in the same area ID of 0.0.0.0.
B. You must change the AS number to match the remote peer.
C. The bfd configuration is set to enable.
D. BGP is attempting to establish a TCP connection with the BGP peer.

정답：D

설명：
The BGP state is "Idle", indicating that BGP is attempting to establish a TCP connection with the peer. This is the first state in the BGP finite state machine, and it means that no TCP connection has been established yet. If the TCP connection fails, the BGP state will reset to either active or idle, depending on the configuration.
https://community.fortinet.com/t5/FortiGate/Technical-Tip-BGP-Neighbor-Adjacency-States/ta- p/208989

질문 # 47
Exhibit.

Refer to the exhibit, which shows a partial web filter profile conjuration What can you cone udo from this configuration about access to www.facebook, com, which is categorized as Social Networking?

A. The access is blocked based on the Content Filter configuration
B. The access is hocked if the local or the public FortiGuard server does not reply
C. The access is blocked based on the URL Filter configuration
D. The access is allowed based on the FortiGuard Category Based Filter configuration

정답：C

설명：
The access to www.facebook.com is blocked based on the URL Filter configuration. In the exhibit, it shows that the URL "www.facebook.com" is specifically set to "Block" under the URL Filter section1. References :
= Fortigate: How to configure Web Filter function on Fortigate, Web filter | FortiGate / FortiOS 7.0.2 | Fortinet Document Library, FortiGate HTTPS web URL filtering ... - Fortinet ... - Fortinet Community

질문 # 48
Which two statements about the neighbor-group command are true? (Choose two.)

A. It is combined with the neighbor-range parameter
B. You can configure it on the GUI
C. You can apply it in Internal BGP (IBGP) and External BGP (EBGP)
D. It applies common settings in an OSPF area

정답：B,C

질문 # 49
Exhibit.

Refer to the exhibit, which shows information about an OSPF interlace
What two conclusions can you draw from this command output? (Choose two.)

A. The OSPF routers are in the area ID of 0.0.0.1.
B. The interfaces of the OSPF routers match the MTU value that is configured as 1500.
C. NGFW-1 is the designated router
D. The port3 network has more man one OSPF router

정답：B,D

설명：
From the OSPF interface command output, we can conclude that the port3 network has more than one OSPF router because the Neighbor Count is 2, indicating the presence of another OSPF router besides NGFW-1.
Additionally, we can deduce that the interfaces of the OSPF routers match the MTU value configured as
1500, which is necessary for OSPF neighbors to form adjacencies. The MTU mismatch would prevent OSPF from forming a neighbor relationship.

질문 # 50
......

Fortinet인증 NSE7_EFW-7.2시험을 등록했는데 마땅한 공부자료가 없어 고민중이시라면ExamPassdump의Fortinet인증 NSE7_EFW-7.2덤프를 추천해드립니다. ExamPassdump의Fortinet인증 NSE7_EFW-7.2덤프는 거의 모든 시험문제를 커버하고 있어 시험패스율이 100%입니다. ExamPassdump제품을 선택하시면 어려운 시험공부도 한결 가벼워집니다.

NSE7_EFW-7.2높은 통과율 인기 시험자료: https://www.exampassdump.com/NSE7_EFW-7.2_valid-braindumps.html

Phil Wilson Phil Wilson

Biography

Fortinet NSE7_EFW-7.2높은통과율시험대비공부자료, NSE7_EFW-7.2높은통과율인기시험자료

Fortinet NSE7_EFW-7.2 시험요강:

Fortinet NSE7_EFW-7.2높은 통과율 인기 시험자료 & NSE7_EFW-7.2최고품질 덤프문제

최신 NSE 7 Network Security Architect NSE7_EFW-7.2 무료샘플문제 (Q45-Q50):

Archives