JN0-481자격증덤프 & JN0-481높은통과율시험덤프문제

그리고 DumpTOP JN0-481 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1q5YCF-yTD7-4BoL5zytVKTOkhUoyCYdd

DumpTOP의Juniper인증 JN0-481시험덤프공부가이드 마련은 현명한 선택입니다. Juniper인증 JN0-481덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.

Juniper JN0-481인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리DumpTOP에서는 빠른 시일 내에Juniper JN0-481관련 자료를 제공할 수 있습니다. DumpTOP의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. DumpTOP 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.

>> JN0-481자격증덤프 <<

JN0-481높은 통과율 시험덤프문제 & JN0-481최신 덤프문제모음집

Juniper인증 JN0-481시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. DumpTOP는 여러분을 위해 최신Juniper인증 JN0-481시험에 대비한Juniper인증 JN0-481덤프를 발췌하였습니다. Juniper인증 JN0-481덤프는Juniper인증 JN0-481시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면DumpTOP의 Juniper인증 JN0-481덤프를 추천합니다.

최신 JNCIS-DC JN0-481 무료샘플문제 (Q68-Q73):

질문 # 68
Juniper Apstra has indicated an anomaly with respect to cabling. What are two ways to remediate the issue? (Choose two.)

A. Have Apstra autoremediate the cabling map using LLDP.
B. Manually edit the cabling map.
C. Redeploy the errant device.
D. Set the invalid ports to a disabled state.

정답：A,B

설명：
A cabling anomaly is an issue that occurs when the physical connections between the devices in the data center fabric do not match the expected connections based on the Apstra Reference Design.
A cabling anomaly can cause problems such as incorrect routing, suboptimal traffic flow, or device isolation.
To remediate the issue, you can use one or both of the following methods:
Manually edit the cabling map. This allows you to override the Apstra-generated cabling and specify the correct connections between the devices.
You can use the Apstra UI or the Apstra CLI to edit the cabling map and apply the changes to the fabric.
Have Apstra autoremediate the cabling map using LLDP. This allows Apstra to collect LLDP data from the devices and use it to update the cabling map automatically.
LLDP is a protocol that allows devices to exchange information about their identity, capabilities, and neighbors. Apstra can use the LLDP data to detect and correct any cabling errors in the fabric.

질문 # 69
Which two statements about VXLAN VNIs are correct? (Choose two.)

A. VNIs are alphanumeric values.
B. VNIs identify a collision domain.
C. VNIs can have over 16 million unique values.
D. VNIs identify a broadcast domain

정답：C,D

설명：
VXLAN VNIs are virtual network identifiers that are used to identify and isolate Layer 2 segments in the overlay network. VXLAN VNIs have the following characteristics:
VNIs can have over 16 million unique values. This is because VXLAN VNIs are 24-bit fields that can range from 4096 to 16777214, according to the VXLAN standard. This allows VXLAN to support a large number of Layer 2 segments and tenants in the network. VNIs identify a broadcast domain. This is because VXLAN VNIs are used to group the end hosts that belong to the same Layer 2 segment and can communicate with each other using VXLAN tunnels. The VXLAN tunnels are established using the VTEP information that is distributed by EVPN. The VTEPs are VXLAN tunnel endpoints that perform the VXLAN encapsulation and decapsulation.
The VXLAN tunnels preserve the Layer 2 semantics and support the broadcast, unknown unicast, and multicast traffic within the same VNI.

질문 # 70
Which statement is true when onboarding a Juniper Networks device using a Juniper Apstra ZTP server?

A. The State can be set In the ztp.Json file on the ZTP server.
B. The Device Key lo be used can be set In the dhcpd.conf file on the ZTP server.
C. The Management IP address cannot be predetermined.
D. The Hostname will be the serial-number of the device.

정답：A

설명：
The ztp.Json file on the Apstra ZTP server contains the configuration parameters for each device that is onboarded using ZTP. One of the parameters is the State, which can be one of the following values: init, ready, in_progress, done, error, or disabled. The State indicates the current status of the device in the ZTP process. For example, if the State is ready, it means that the device is ready to be onboarded by the Apstra ZTP server. If the State is done, it means that the device has completed the ZTP process and is managed by the Apstra server. The State can be manually set or changed in the ztp.Json file to control the behavior of the device during ZTP.

질문 # 71
In Juniper Apstra. which three modes are available for devices? (Choose three.)

A. Stopped
B. Active
C. Deploy
D. Ready
E. Drain

정답：C,D,E

설명：
Juniper Apstra supports three deploy modes for devices: Deploy, Drain, and Ready. These modes determine the configuration and state of the devices in the data center fabric.
Deploy: This mode applies the full Apstra-rendered configuration to the device, according to the Apstra Reference Design. The device state becomes IS-ACTIVE and the device is ready to carry traffic in the fabric.
Drain: This mode adds a "drain" configuration to the device, which prevents any new traffic from entering the device. The device state becomes IS-READY and the device is prepared for maintenance or decommissioning.
Ready: This mode removes the Apstra-rendered configuration from the device, leaving only the basic configuration such as device hostname, interface descriptions, and port speed/breakout.
The device state becomes IS-READY and the device is not part of the fabric.

질문 # 72
Using Juniper Apstra. which component is defined in a template?

A. the leaf-to-spine interconnection
B. the speed of the links between the spine devices and the leaf devices
C. the definition of IP pools
D. the number of spine devices in a topology

정답：A

설명：
A template is a configuration template that defines a network's policy intent and structure. A template can be either rack-based or pod-based, depending on the type and number of racks and pods in the network design. A template includes the following details:
Policies: These are the parameters that apply to the entire network, such as the overlay control protocol, the ASN allocation scheme, and the underlay type.
Structure: This is the physical layout of the network, such as the type and number of racks, pods, spines, and leaves. The structure also defines the leaf-to-spine interconnection, which is the number and type of links between the leaf and spine devices. The leaf-to-spine interconnection can be either single or dual, depending on the redundancy and bandwidth requirements.
Therefore, the correct answer is A. the leaf-to-spine interconnection. This is a component that is defined in a template, as it determines the physical connectivity of the network. The speed of the links, the number of spine devices, and the definition of IP pools are not components that are defined in a template, as they are either derived from the device profiles, the resource pools, or the blueprint settings.

질문 # 73
......

현재 경쟁울이 심한IT시대에,Juniper JN0-481자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리DumpTOP 에서 여러분은Juniper JN0-481관련 학습지도서를 얻을 수 있습니다. 우리DumpTOP는 IT업계엘리트 한 강사들이 퍼펙트한Juniper JN0-481문제집을 만들어서 제공합니다. 우리가 제공하는Juniper JN0-481문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.

JN0-481높은 통과율 시험덤프문제: https://www.dumptop.com/Juniper/JN0-481-dump.html

Juniper 인증JN0-481시험출제경향을 퍼펙트하게 연구하여DumpTOP에서는Juniper 인증JN0-481시험대비덤프를 출시하였습니다, Juniper인증 JN0-481덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다, JN0-481높은 통과율 시험덤프문제 - Data Center, Specialist (JNCIS-DC) 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다, DumpTOP의Juniper인증 JN0-481덤프로 시험에 다시 도전해보세요, DumpTOP에서 제공해드리는 전면적인 JN0-481 시험대비덤프로 JN0-481시험준비공부를 해보세요, 아직도Juniper JN0-481시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까?

가, 간신히 살았군, 이번에도 대답은 상헌이 했다, Juniper 인증JN0-481시험출제경향을 퍼펙트하게 연구하여DumpTOP에서는Juniper 인증JN0-481시험대비덤프를 출시하였습니다, Juniper인증 JN0-481덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다.

JN0-481자격증덤프 기출문제 공부하기

Data Center, Specialist (JNCIS-DC) 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다, DumpTOP의Juniper인증 JN0-481덤프로 시험에 다시 도전해보세요, DumpTOP에서 제공해드리는 전면적인 JN0-481 시험대비덤프로 JN0-481시험준비공부를 해보세요.

BONUS!!! DumpTOP JN0-481 시험 문제집 전체 버전을 무료로 다운로드하세요: https://drive.google.com/open?id=1q5YCF-yTD7-4BoL5zytVKTOkhUoyCYdd

Harper Taylor Harper Taylor

Biography

JN0-481자격증덤프 & JN0-481높은통과율시험덤프문제

JN0-481높은 통과율 시험덤프문제 & JN0-481최신 덤프문제모음집

최신 JNCIS-DC JN0-481 무료샘플문제 (Q68-Q73):

JN0-481자격증덤프 기출문제 공부하기

Archives