ISTQB-CTAL-TA인증덤프공부, ISTQB-CTAL-TA인기자격증덤프문제

Fast2test선택으로ISTQB ISTQB-CTAL-TA시험을 패스하도록 도와드리겠습니다. 우선 우리Fast2test 사이트에서ISTQB ISTQB-CTAL-TA관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의Fast2test에 신뢰감을 느끼게 됩니다. Fast2test에서 제공하는ISTQB ISTQB-CTAL-TA덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.

ISTQB-CTAL-TA라고도하는 ISTQB 인증 테스터 고급 레벨 (Syllabus 2012) 인증 시험은 테스트 분석에서 기술을 발전시키려는 소프트웨어 테스터를위한 전 세계적으로 인정 된 인증입니다. 이 인증은 테스트 기술, 테스트 설계 및 테스트 구현에 대한 전문 지식을 보여 주려는 전문가를 위해 설계되었습니다. 인증은 International Software Testing Qualifications Board (ISTQB)에서 제공하며, 이는 전 세계 소프트웨어 테스트 표준 및 모범 사례를 홍보하는 비영리 조직입니다.

ISTQB 인증 테스터 고급 레벨 - 테스트 분석가 (Syllabus 2012) 또는 ISTQB-CTAL-TA 시험은 테스트 분석에 대한 고급 지식과 기술을 입증하고자 하는 소프트웨어 테스트 전문가를 위한 자격증 시험입니다. 이 시험은 이미 ISTQB Foundation Level 시험을 통과하고 소프트웨어 테스트 경험을 쌓은 개인을 대상으로합니다.

>> ISTQB-CTAL-TA인증덤프공부 <<

ISTQB-CTAL-TA 시험대비자료 & ISTQB-CTAL-TA 응시자료 & ISTQB-CTAL-TA 덤프문제

ISTQB인증 ISTQB-CTAL-TA시험은 IT인증시험중 가장 인기있는 시험입니다. ISTQB인증 ISTQB-CTAL-TA시험패스는 모든 IT인사들의 로망입니다. Fast2test의 완벽한 ISTQB인증 ISTQB-CTAL-TA덤프로 시험준비하여 고득점으로 자격증을 따보세요.

ISTQB-CTAL-TA (ISTQB CTAL-TA) 자격증 시험은 테스트 분석에서 지식과 기술을 향상시키고자 하는 숙련된 소프트웨어 테스터를 대상으로 설계되었습니다. 이 시험은 테스트 디자인 기법, 테스트 관리, 결함 관리, 테스트 자동화 및 위험 기반 테스트와 같은 다양한 주제를 다루는 2012 교육과정을 기반으로 합니다. 이 자격증은 전 세계적으로 인정되며 테스트 분석에서의 숙련도를 입증합니다.

최신 Advance Level ISTQB-CTAL-TA 무료샘플문제 (Q66-Q71):

질문 # 66
An airline provides self-service check-in kiosks for its passengers. The user is asked to present the passport for reading, enter the flight booking number, the seats requested, the number of bags to check-in, and acknowledge that security requirements have been met. The machine then prints the boarding passes.
The following use case has been created:
USE CASE: SELF-SERVICE CHECK-IN
* Use case ID:UC23
* Purpose:Passenger checks-in using the self-service kiosk application.
* Actors:Passenger, System
* Pre-conditions:User selects to start self-service check-in at the kiosk and the system asks the user to place the passport on the reader.

You are to apply the Use Case test technique, where the following coverage rules have been defined in the test plan:
* One test case should be designed for the basic behavior.
* One test case should be designed for each alternate and error-handling behavior.
Applying these rules to the Self-Service Check-In Use Case, how many test cases should be designed?
SELECT ONE OPTION:

A. 0
B. 1
C. 2
D. 3

정답：B

설명：
Comprehensive and Detailed In-Depth Explanation:
The use case has onebasic behavior(happy path) where all steps are completed without any errors.
In addition, there are7 error-handling cases (E1 to E7)that each require a separate test case to verify that the system correctly handles each error condition.
Therefore, the total number of test cases required is:
* 1 basic behavior test case
* 7 error-handling test cases
1+7=8
Hence, the correct answer isB (8).

질문 # 67
Your company is developing a new website that will be accessed by many user roles, including adults, seniors, and children. Testing must ensure that the website is appropriate for all these users.
Which of the following is the earliest test level where this requirement should start to be tested?
SELECT ONE OPTION:

A. During system testing
B. During beta acceptance testing
C. During user acceptance testing using a WAMMI survey
D. During component testing

정답：A

설명：
Comprehensive and Detailed In-Depth Explanation:
* Component Testing (C) focuses on individual components or units and does not address usability or role-based testing.
* System Testing (D) is the first level where the complete and integrated system is tested as a whole.
It includes testing non-functional requirements such as usability, accessibility, and suitability for different user roles.
* User Acceptance Testing (A) and Beta Acceptance Testing (B) are done later and focus on validating the product according to user needs and real-world scenarios.
Since testing for role appropriateness and usability should start as early as possible in the testing lifecycle, the correct answer is D (During system testing).

질문 # 68
As a Test Analyst you are involved in the early stages of an acceptance test for a Product Data Management system. You are asked to write test designs and test cases based on use cases. An earlyversion of the system is already available. It is expected that many things will change (including the user interface) during implementation of the new version.
The tests will be conducted by end-users with much domain knowledge who have also been involved in the project defining the user requirements (in the format of use cases) and reviewing other documentation.
What Is the BEST option regarding the level of detail and documentation required for test cases in the project?

A. Low-level test cases only since the end-users have extensive domain knowledge.
B. High-level test cases supported by low-level test cases to allow for traceability and enable future changes.
C. Detailed low-level test cases since many re-runs of the tests are expected.
D. High-level test cases only since the end-users have extensive domain knowledge and many changes are expected

정답：D

설명：
High-level test cases only are the best option for this project, as they provide enough guidance for the end- users who have extensive domain knowledge and can fill in the details as they execute the tests. Moreover, high-level test cases are easier to maintain and adapt when many changes are expected in the system under test, as opposed to detailed low-level test cases that would require more effort and time to update. Verified References: ISTQB Certified Tester Advanced Level Test Analyst CTAL-TA, Section 3.1.1, page 29.

질문 # 69
You are testing the processing of a critical traffic control system to which various regulations apply The processing of the input variables is dependent on defined ranges within which the actual retrieved data values can lie.
Which of the following black-box test techniques should you use to test the processing functionality of this system?

A. State transition testing
B. Equivalence partitioning enhanced with boundary value analysis
C. Pairwise testing
D. Use case testing

정답：B

설명：
The best black-box test technique to test the processing functionality of this system is equivalence partitioning enhanced with boundary value analysis. Equivalence partitioning is a technique that divides the input domain into subdomains that are expected to behave similarly. Boundary value analysis is a technique that tests the values at or near the boundaries of an input domain. These techniques are suitable for testing a system that depends on defined ranges of input variables, as they can ensure that all subdomains and boundary values are covered by test cases. Verified References: [ISTQB Certified Tester Advanced Level Test Analyst CTAL- TA], Section 3.2.1, page 33 and Section 3.2.2, page 35.

질문 # 70
You are the Test Analyst reviewing a risk register and designing test conditions for the highest priority product risks related to Iterations 1 and 2 only.

Which of the following product risks would you design test conditions for first?
SELECT ONE OPTION:

A. R03
B. R04
C. R02
D. R01

정답：A

설명：
Comprehensive and Detailed In-Depth Explanation:
* R01:Low likelihood, not the highest priority.
* R02:Relates to Iteration 3, which is out of scope for Iterations 1 and 2.
* R03:High impact and medium likelihood, relevant to both IOS (Iteration 1) and Android (Iteration 2).
* R04:Medium impact and medium likelihood, less critical compared to R03.
Therefore, the correct answer isA (R03).

질문 # 71
......

ISTQB-CTAL-TA인기자격증 덤프문제: https://kr.fast2test.com/ISTQB-CTAL-TA-premium-file.html

Ed Fox Ed Fox

Biography

ISTQB-CTAL-TA인증덤프공부, ISTQB-CTAL-TA인기자격증덤프문제

ISTQB-CTAL-TA 시험대비자료 & ISTQB-CTAL-TA 응시자료 & ISTQB-CTAL-TA 덤프문제

최신 Advance Level ISTQB-CTAL-TA 무료샘플문제 (Q66-Q71):

Archives