真実的International Code Council Fire-Inspector-II｜便利なFire-Inspector-II合格問題試験｜試験の準備方法67 - Fire Inspector II Exam学習指導

無料でクラウドストレージから最新のPassTest Fire-Inspector-II PDFダンプをダウンロードする：https://drive.google.com/open?id=1AbHyWQDcso8OxPzFoOIgA5E5lzNZWO3o

Fire-Inspector-II練習問題を買いたい場合、自分のメールアドレスを記入してください。そうすれば、支払ったら、すくお客様にFire-Inspector-II練習問題を送付できます。だから、それは重要な情報です。また、もしFire-Inspector-II練習問題は更新されましたら、弊社は最新版をお客様のメールボックスに送付致します。

時代に対応するために、科学技術は人々の学習方法を向上させると信じています。特にこのようなペースの速い生活テンポでは、効率の高い学習を非常に重視しています。したがって、当社のFire-Inspector-II学習資料は、過去の試験問題と現在の試験の傾向に基づいており、実際の試験環境に配置するためのこのような効果的なシミュレーション機能を設計します。高度なFire-Inspector-II学習教材を備えた高品質のシミュレーションシステムを提供することをお約束します。シミュレーション機能により、Fire-Inspector-IIトレーニングガイドの理解が容易になり、Fire-Inspector-II試験に合格できます。

>> Fire-Inspector-II合格問題 <<

International Code Council 67 - Fire Inspector II Exam 認定 Fire-Inspector-II 試験問題 (Q75-Q80):

質問 # 75
Exit signs shall have words on the sign in letters ___ inches in height.

A. six
B. three
C. five
D. four

正解：D

解説：
1.
Exit Sign Letter Height Requirement
According to the International Fire Code (IFC) 2021, Section 1013.5, and the International Building Code (IBC) 2021, Section 1013.5, exit sign letters must be at least 6 inches in height. However, the minimum height requirement for the wording within the sign (e.g., "EXIT") is specifically 4 inches.
The stroke width of these letters must be at least 0.5 inches to ensure visibility.
2. Verification of Other Options
Option A (three inches) - Below the minimum height requirement. Incorrect.
Option C (five inches) - Exceeds the minimum standard but is not the correct minimum required size.
Incorrect.
Option D (six inches) - This applies to the total EXIT sign height, but the actual letter requirement is 4 inches.
Incorrect.
Reference Sources:
International Fire Code (IFC) 2021 - Section 1013.5
International Building Code (IBC) 2021 - Section 1013.5
NFPA 101: Life Safety Code (Exit Sign Requirements)

質問 # 76
The minimum working space width for a 66-in. wide electrical equipment panel shall be in

A. 0
B. 1
C. 2
D. 3

正解：B

解説：
Minimum Working Space Width for Electrical Equipment Panels
According to National Electrical Code (NEC) 110.26(A)(2) and International Fire Code (IFC) 2021, Section
604.3, the minimum working space width for electrical equipment must be at least the width of the equipment or 30 inches, whichever is greater.
Since the equipment panel in the question is 66 inches wide, the required working space width must be at least 66 inches.
2. Why 66 Inches is the Correct Answer
The minimum clearance width must be equal to the width of the electrical equipment if the panel itself is wider than 30 inches.
This ensures safe maintenance and emergency access to electrical components.
3. Verification of Other Options
Option A (30 inches) - Incorrect, because the equipment is wider than 30 inches, requiring a larger clearance.
Option B (36 inches) - Incorrect, as this is not the requirement for a 66-inch-wide panel.
Option D (78 inches) - Incorrect, as the clearance does not need to exceed the width of the panel.
Reference Sources:
National Electrical Code (NEC) 2023 - Section 110.26(A)(2) (Working Space Width Requirements) International Fire Code (IFC) 2021 - Section 604.3 (Electrical Equipment Clearance Requirements) ICC Fire Inspector II Study Guide (2021)

質問 # 77
The interior finish of walls and a ceiling in an atrium may not be less than __ Class

A. Class B - Less fire-resistant than Class A, not permitted for atriums.
B. Class D - Not recognized as an acceptable interior finish classification for atriums.
C. Class C - Provides even lower fire protection, making it unsuitable.
D. Class A - Interior Finish Ratings (Per ASTM E84 and NFPA 286).

正解：D

解説：
The interior finish requirements for walls and ceilings in an atrium are regulated under the 2021 International Building Code (IBC), Section 404 - Atriums, and Table 803.11 - Interior Wall and Ceiling Finish Requirements.
IBC Section 404.8 - Interior Finish in Atriums:
"The interior finish of walls and ceilings in an atrium shall be not less than Class A." Class A interior finishes have the highest level of fire resistance and low flame spread to minimize fire hazards in large open spaces like atriums.

質問 # 78
Smoking is not permitted within ___ ft. of a transfer point for LP-gas while filling operations are in progress.

A. 0
B. 1
C. 2
D. 3

正解：D

解説：
Smoking Restrictions Near LP-Gas Transfer Points
According to the International Fire Code (IFC) 2021, Section 3807.2, smoking is not permitted within 25 feet of an LP-gas transfer point while filling operations are in progress.
This prevents ignition hazards, as LP-gas is highly flammable and can ignite from cigarettes, matches, or lighters.
2. Why 25 Feet is the Correct Answer
LP-gas vapors are heavier than air and can travel significant distances before igniting.
The 25-foot clearance requirement is set to prevent accidental ignition due to an undetected vapor leak.
3. Verification of Other Options
Option A (10 feet) - Incorrect, as this is the requirement for smaller propane cylinder storage areas, not transfer points.
Option B (15 feet) - Incorrect, as IFC mandates a 25-foot minimum clearance.
Option D (50 feet) - Incorrect, as the IFC requirement is specifically 25 feet, not 50.
Reference Sources:
International Fire Code (IFC) 2021 - Section 3807.2 (Smoking Prohibitions Near LP-Gas Transfer Points) NFPA 58: Liquefied Petroleum Gas Code (Safe Handling and Transfer Requirements) ICC Fire Inspector II Study Guide (2021) Thus, the correct and verified answer is: C. 25 feet. #

質問 # 79
Pressure tests for organic coating process piping shall be conducted for a minimum of:

A. 45 minutes
B. 30 minutes
C. 1 hour
D. 2 hours

正解：C

解説：
Pressure tests for organic coating process piping are required to ensure system integrity and prevent leaks, which could lead to fire or explosion hazards. The minimum required duration for these pressure tests is 1 hour.
Reference to Fire Inspector Documentation:
1. 2021 International Fire Code (IFC) - Section 1504.6.3 (Pressure Testing for Organic Coating Process Piping) IFC 1504.6.3 mandates that all process piping associated with organic coating operations must undergo a pressure test for at least 1 hour. This ensures that the pipes can handle operational pressures without failure.
2. NFPA 33 - Standard for Spray Application Using Flammable or Combustible Materials (2021 Edition) NFPA 33, Section 14.2.6 confirms that process piping must be pressure-tested for no less than 1 hour to verify its safety and reliability.
Detailed Explanation of Answer Choices:
Option A (Incorrect): 30 minutes is insufficient for proper pressure testing.
Option B (Incorrect): 45 minutes is still below the 1-hour minimum requirement.
Option C (Correct): 1 hour is the correct minimum test duration as required by IFC 1504.6.3 and NFPA 33.
Option D (Incorrect): 2 hours is longer than required, but the minimum requirement is 1 hour.
Thus, the correct and verified answer is: C. 1 hour.

質問 # 80
......

PassTestは、Fire-Inspector-II試験にスムーズに合格するのに役立ちます。最高のFire-Inspector-II学習教材へのチャンネルについて心配する必要はありません。多くの受験者は、彼らの助けを提供する寛大さを賞賛します。これまで、この分野の主導的地位に挑戦した人はいませんでした。 International Code CouncilのFire-Inspector-II学習ガイドの存在は、試験に合格する効率を高めるものと見なされます。当社は、時間の経過とともに、受験者が最大98〜100％の合格率で受験できるようになります。すべての行動は、Fire-Inspector-II試験で67 - Fire Inspector II Exam成功する可能性を向上させることを目指しています。

Fire-Inspector-II学習指導: https://www.passtest.jp/International-Code-Council/Fire-Inspector-II-shiken.html

将来の重要な問題はどうやって一回で効果的にInternational Code CouncilのFire-Inspector-II認定試験に合格するかのことになります、テスト練習ソフトウェアは、実際のテストを刺激し、複数の練習モデル、Fire-Inspector-IIトレーニング教材の練習の履歴記録、自己評価機能を高めるテストスキームを向上させます、私たちのFire-Inspector-II勉強指導資料は有効であり、あなたのテストに役立ちます、私たちの会社は合法で専門的です、International Code Council Fire-Inspector-II合格問題 ”答えはもちろんですよ、私たちのFire-Inspector-II試験問題を利用し、ほかの資料が克服できない障害を克服できます、情報技術の急速な発展のこの時代では、Fire-Inspector-IIの試験準備問題がその一つによって提供されます、その後、リンクをクリックしてログインすると、ソフトウェアを使用してFire-Inspector-II prepトレントをすぐに学習できます。

和泉が、がつんと朔耶を追い上げる、しかし真実は源氏もそんな醜い関係にまで進ませようとは思っていなかった、将来の重要な問題はどうやって一回で効果的にInternational Code CouncilのFire-Inspector-II認定試験に合格するかのことになります。

Adam Shaw Adam Shaw

Biography

真実的International Code Council Fire-Inspector-II｜便利なFire-Inspector-II合格問題試験｜試験の準備方法67 - Fire Inspector II Exam学習指導

最新Fire-Inspector-II｜完璧なFire-Inspector-II合格問題試験｜試験の準備方法67 - Fire Inspector II Exam学習指導

International Code Council 67 - Fire Inspector II Exam 認定 Fire-Inspector-II 試験問題 (Q75-Q80):

最新の更新Fire-Inspector-II合格問題 & 検証するInternational Code Council 認定トレーニング - 素敵なInternational Code Council 67 - Fire Inspector II Exam

Archives